5 0 0 0 6 a
TOPTRAC CONCEPT / DETAILS
Improves Total Cost of Ownership Use high grade material only where required. The base plate is made of basic material. The strips are Nolu-SR. When, after some years of use, the curve is due for replacement, only the strips need replacing. Cost of strips is much lower than the cost of an entire curve upperpart. Reduces the need of high value spare parts. Just a few strips are enough to be well prepared for maintenance jobs.
TopTrac curve Traditional curve
TCO Time
Clip-on profiles Replaceable Nolu-SR profiles. Reduced maintenance and installation time and costs. Independent maintenance for each track. Replacing the strips can be done with the curve still mounted in the conveyor. This drastically reduces the required time for replacement. Maintenance becomes quicker and easier. For profiles, go to: Optimized magnetic field Smoother chain operation and reduced risk of stick-slip effect. Optimized and homogenous magnetic field with pilot holes similar to standard curve offering for better interchangeability. Improved engineered design. Better product stability. Ferrite Magnets are now screwed into the central rib running across the magnet pocket ensuring positive locking. Introduction to curves. Go to:
UHMWPE Solid lubricant
HDPE 500 UMHW-PE1000 UMHW-PE1200 Nylatron GSM/NSM Nolu-S (R)
Coefficient of friction comparison of materials
Nolu-S(R) material are a unique compound of UHMWPE and a solid lubricant. They drastically reduce the coefficient of friction, maintaining the characteristics of UHMWPE. Nolu-SR material have a better thermal conductivity compared with UHMWPE. Benefits and features of Nolu-S(R) material: They makes very high speeds possible, especially when running dry. They has an extremely low coefficient of friction. They reduces noise and squeaking. They reduces chain pull. They extends the life of the chain. They does not damage and scratch the surface of PET. They reduces the consumption of energy. They is a UHMWPE with a solid lubricant.
INDEX CURVES GO TO:
Index standard magnetic curves and TOPTRAC TCO COMPARISON TRADITIONAL AND TOPTRAC CURVE
PATENTED
NYLATRON is believed to be the trademark and/or trade name of Quadrant EPP USA Inc. and is not owned or controlled by Regal Beloit Corporation.
Revision 001
www.SystemPlastSmartGuide.com
1 1 0 1 0 a 5 3 5 1 0 a 5 0 5 1 0 a 3 0 0 1 0 a 5 4 0 1 0 a 5 1 0 1 0 a 5 0 0 0 5 a 5 4 5 1 0 a 5 1 5 1 0 a 5 5 5 1 0 a 5 6 0 1 0 a 5 7 0 1 0 a 7 2 0 1 0 a
5 0 5 6 5 a
5 0 0 0 5 a
5 0 0 1 0 a
Chains & sprockets Wear strips Side guide brackets & accessories Levelers Engineering manual Modular belts & sprockets Chain & belt return systems Frame & structure supports Bearing supports Curves & tracks Side guide solutions Miscellaneous products Equipment
c lic k f o r v ide o
Previous Page