72010a
72110a 73010a 72510a
7 3 5 7 5 a
M a i n t e n a n ce
Co n s t r u c ti on
A p li c a ti o n
MATERIALS AND CALCULATIONS - General index -
Revision 001
20 010a 10 0a 0 0a a 0a 1 10a a 0a 10a a 1 20 010a 0a 10a 0a 10a 0 0a a 0a 1 10a a 10
Contacts: EUROPE and ROW : SystemPlastTechSupport@regalbeloit.com; USA : systemplast.engineering@regalbeloit.com; Engineering calculator:
CURVE, WEARSTRIPS, SIDE GUIDE, SPROCKETS AND RETURN ROLLER
MATERIALS
ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE)
This Polyethylene polymer with extremely high molecular weight has several unique properties such as high abrasion resistance, impact strength and low coefficient of friction. The UHMWPE are used for our side guide profiles, curves and wearstrips.
HIGH-DENSITY POLYETHYLENE (PE-HD)
The high-density polyethylene is used for return roller and it has a good abrasion resistance, impact strength and a low coefficient of friction.
POLYAMIDE (PA)
The impact polyamide resin is used for return roller to offer a high strength and wear resistance.
GLASS FIBER REINFORCED POLYAMIDE (PA-FV)
The reinforced polyamide with glass fiber is used for molded sprockets and idlers to offer a high strength and wear resistance.
ANTISTATIC ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE-AS)
This PE polymer with extremely high molecular weight has several unique properties such as good wear resistance, good impact strength, good sliding and antistatic properties. These properties make the material suitable for curves and straight tracks. Surface Resistivity: 10
3
- 10
4
; Volume Resistivity: 10
3
- 10
4
.cm.
POLYAMIDE (PA)
The cast polyamide 6 is used for machined sprockets and idlers to offer a high strength and wear resistance.
NOLU -CP PARTS
Nolu-CP parts are made with Regal's exclusive compounds of UHMWPE and micro glass beads. Curves and neck guide made with this material are the most suitable for abrasive working conditions.
POM-ACETAL
This polyacetal used for roller guide provide a high rigidity, hardness and toughness and good chemical resistance to alkalis.
UHMWPE GREEN PE-HD BLACK PA BLACK UHMWPE BLACK PE-HD GREEN PA GREEN PA BLACK UHMWPE-AS BLACK UHMWPE WHITE PA WHITE POM - WHITE NOLU -CP UHMWPE WATER BLUE POM - GREEN
CURVES, WEARSTRIPS AND SIDE GUIDE MATERIALS SPROCKETS, IDLER MATERIALS RETURN ROLLERS MATERIALS
Steel chain materials Storage of plastic chains and belts & RoHs Coefficient of friction - Measurement procedure Chemical resistance of standard materials Coefficient of friction of standard materials Application temperatures
7 3 5 1 0 a 7 3 5 6 0 a 7 3 5 8 0 a 7 3 5 7 6 a 7 3 5 8 6 a 7 3 5 7 8 a 7 3 5 8 8 a
1 1 0 1 0 a 5 3 5 1 0 a 5 0 5 1 0 a 3 0 0 1 0 a 5 4 0 1 0 a 5 1 0 1 0 a 5 0 0 0 5 a 5 4 5 1 0 a 5 1 5 1 0 a 5 5 5 1 0 a 5 6 0 1 0 a 5 7 0 1 0 a 7 2 0 1 0 a
Chains & sprockets Wear strips Side guide brackets & accessories Levelers Engineering manual Modular belts & sprockets Chain & belt return systems Frame & structure supports Bearing supports Curves & tracks Side guide solutions Miscellaneous products Equipment
Previous Page